POWER SEAT SWITCH (for Driver Seat) INSTALLATION


  1. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY


    1. A01CFYD

      Connect the 2 connectors.

    2. Install the position control ECU and switch assembly with the 3 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A01CF1N

      Engage the 8 claws, clip and 4 guides.

    2. A01CBEF

      Install the front seat cushion shield assembly, No. 2 reclining adjuster inside cover RH and No. 2 reclining adjuster inside cover LH with the 7 screws.

    3. A01CEGT

      Engage the 2 hooks.

  3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01CD2S

      Install the slide and vertical power seat switch knob.

  4. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A01CEA5

      Install the reclining power seat switch knob.

  5. INSTALL FRONT SEAT ASSEMBLY


    1. A01CFBA

      Place the front seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01CAQF

      Connect the 2 connectors.

    3. Connect the cable to the negative (-) battery terminal.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    4. Temporarily install the front seat assembly with the 4 bolts.

    5. Operate the slide and vertical power seat switch knob and move the seat to the rearmost position.

    6. A01CBCPE01

      Tighten the 2 bolts on the front side of the seat.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

    7. A01CBYK

      Engage the 2 claws and guide to close the cover.

    8. A01CB6N

      Engage the 2 claws and guide to close the cover.

    9. Operate the slide and vertical power seat switch knob and move the seat to the foremost position.

    10. A01CBJRE01

      Tighten the 2 bolts on the rear side of the seat.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

      Tech Tips

      Tighten the bolts in the order indicated in the illustration.

    11. The seat travel distance can be customized, this function is ON Click here.

  6. INSTALL FRONT SEAT HEADREST ASSEMBLY

  7. INSTALL FRONT SEAT LEG COVER RH


    1. A01CF35

      Engage the 6 claws and guide to install the front seat leg cover.

    2. A01CEMJ

      Install the floor carpet.

  8. INSTALL NO. 3 FLOOR CARPET MOULDING


    1. A01CGEM

      Engage the 2 clips and install the 2 No. 3 floor carpet mouldings.

  9. INSTALL DOOR SCUFF PLATE ASSEMBLY RH


    1. A01CFWN

      Engage the 3 guides, claw and 6 clips to install the door scuff plate assembly RH.

  10. INSTALL COWL SIDE TRIM BOARD LH (for LHD)


    1. A01CCIK

      Engage the 2 guides, claw and clip to install the cowl side trim board LH.

    2. Install the clip(A).

  11. INSTALL COWL SIDE TRIM BOARD RH (for RHD)


    1. A01CFL6

      Engage the 2 guides, claw and clip to install the cowl side trim board RH.

    2. Install the clip(A).

  12. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.

  13. INSPECT FRONT SEAT ASSEMBLY


    1. Inspect the power seat operation Click here.

  14. INSPECT SEAT BELT WARNING SYSTEM


    1. Inspect the seat belt warning system Click here.