INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER RH
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings.
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
Engage the 2 fasteners.
INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL NO. 1 FRONT SEAT INNER CUSHION SHIELD LH
Use the same procedure for the RHD and LHD (Click here).
INSTALL NO. 1 FRONT SEAT INNER CUSHION SHIELD RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL FRONT SEAT INNER CUSHION SHIELD RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL FRONT SEAT CUSHION SHIELD RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
Use the same procedure for the RHD and LHD (Click here).
INSTALL RECLINING POWER SEAT SWITCH KNOB
Use the same procedure for the RHD and LHD (Click here).
INSTALL LOWER FRONT SEAT LEG COVER RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL FRONT SEAT LEG ASSEMBLY RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL FRONT SEAT ASSEMBLY RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL FRONT SEAT HEADREST ASSEMBLY
INSTALL FRONT SEAT LEG COVER RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL NO. 3 FLOOR CARPET MOULDING
Use the same procedure for the RHD and LHD (Click here).
INSTALL DOOR SCUFF PLATE ASSEMBLY RH
Use the same procedure for the RHD and LHD (Click here).
INSTALL COWL SIDE TRIM BOARD RH
Use the same procedure for the RHD and LHD (Click here).
INSPECT SRS WARNING LIGHT
INSPECT FRONT SEAT ASSEMBLY
INSPECT SEAT BELT WARNING SYSTEM