FRONT DOOR COURTESY SWITCH INSTALLATION


  1. INSTALL FRONT DOOR COURTESY SWITCH ASSEMBLY


    1. A01CAYM

      Install the front door courtesy switch assembly.

    2. Using "TORX" socket wrench T30, install the "TORX" bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the connector.

  2. INSTALL LOWER CENTER PILLAR GARNISH

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  3. INSTALL NO. 2 ASSIST GRIP

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  4. INSTALL ASSIST GRIP PLUG

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  5. INSTALL FRONT SEAT OUTER BELT ASSEMBLY

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  6. INSTALL LAP BELT OUTER ANCHOR COVER

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  7. INSTALL NO. 1 SLIDE DOOR WEATHERSTRIP

  8. INSTALL REAR DOOR SCUFF PLATE

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  9. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

  10. INSTALL DOOR SCUFF PLATE ASSEMBLY

    Tech Tips

    Use the same procedure for the LH side and RH side Click here.

  11. INSTALL COWL SIDE TRIM BOARD LH (for LH Side)

    for RHD: Click here

    for LHD: Click here

  12. INSTALL COWL SIDE TRIM BOARD RH (for RH Side)

    for RHD: Click here

    for LHD: Click here