POWER DOOR LOCK CONTROL SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING THE BATTERY CABLE

    Note

    When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the terminal is reconnected.

    System Name See Procedure
    Parking Assist Monitor System

    Click here

    Power Slide Door System
    Slide Door Closer System
    Back Door Closer System
    Power Back Door System

  2. PRECAUTION WHEN USING INTELLIGENT TESTER


    1. When using the intelligent tester to troubleshoot the power door lock control system:

      Connect the intelligent tester to the DLC3 while the engine switch is off, and turn a door courtesy light switch on and off at 1.5-second intervals until communication between the tester and vehicle begins.