OIL PRESSURE SWITCH REMOVAL


  1. REMOVE RADIATOR COVER SUB-ASSEMBLY


    1. A01CDEV

      Using a clip remover, remove the 4 clips and radiator cover sub-assembly.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE BATTERY


    1. Disconnect the positive (+) cable from the positive (+) battery terminal.

    2. A01CDEA

      Disconnect the 2 wire clamps.

    3. Loosen the nut, and remove the bolt and battery clamp.

    4. Remove the battery and battery insulator.

  4. REMOVE BATTERY TRAY


    1. Remove the battery tray.

  5. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the oil pressure switch connector.

    2. A01CESY

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.