LUMBAR SWITCH (for Power Seat) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL LUMBAR SWITCH ASSEMBLY

    A009AMC

    1. Connect the lumbar switch connector.

    2. Attach the 2 claws to install the lumbar switch.

  2. INSTALL FRONT POWER SEAT SWITCH LH


    1. w/ Seat Memory System:

      Connect the 2 power seat switch connectors.

    2. w/o Seat Memory System:

      Connect the power seat switch connector.

    3. Install the power seat switch with 3 screws.

  3. INSTALL FRONT SEAT CUSHION SHIELD LH


    1. Attach the 3 wire harness clamps and connect the seat wire connector.

    2. Attach the 3 claws to close the wire harness cover.

    3. Remove the clip attached to the seat cushion spring and install it to the cushion shield.

      A00XC3S

    4. Attach the 2 clips, 3 claws and guide.

    5. Attach the guide of the front seat No. 1 inner cushion shield and install the screw.

    6. Connect the lifter motor connector.

  4. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A00XJBW

      Attach the 2 claws to install the knob.

  5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A00XD3C

    1. Attach the 2 claws to install the knob.

  6. INSTALL FRONT SEAT ASSEMBLY


    1. Install the front seat assembly Click here.