CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
INSTALL FRONT SEAT ASSEMBLY
Place the front seat assembly in the cabin.
Note
Be careful not to damage the vehicle body.
Connect the seat wire connectors under the seat.
Temporarily install the front seat assembly with the 4 bolts.
Connect the cable to the negative (-) battery terminal.
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
Operate the power seat switch to move the seat to the rearmost position.
Tighten the bolts in the order indicated in the illustration.
Operate the power seat switch to move the seat to the foremost position.
Tighten the bolts in the order indicated in the illustration.
INSTALL SEAT TRACK COVER LH
Move the cover in the direction of the arrow to attach the 4 guides.
Attach the 2 claws to install the cover.
INSTALL INNER SEAT TRACK BRACKET COVER LH
Move the cover in the direction of the arrow to attach the 2 guides.
Attach the 2 claws to install the cover.
INSTALL FRONT SEAT OUTER TRACK BRACKET COVER LH
Operate the power seat switch to move the seat to the rearmost position.
Move the cover in the direction of the arrow to attach the 2 claws and guide.
Attach the 2 claws to install the cover.
INSTALL FRONT SEAT INNER TRACK BRACKET COVER LH
Move the cover in the direction of the arrow to attach the 2 guides.
Attach the 2 claws to install the cover.
INSTALL FRONT SEAT HEADREST ASSEMBLY
Install the front seat headrest.
CHECK SRS WARNING LIGHT
Check the SRS warning light Click here.
INSPECT FRONT SEAT ASSEMBLY
w/ Memory:
Check the power seat operation Click here.
w/o Memory:
Check the power seat operation Click here.
w/ Seat Heater System:
Check the seat heater operation.
Turn the ignition switch to ON.
Turn the seat heater switch on.
Wait 5 minutes or more and confirm that the seat surface becomes warm.