FUEL LID LOCK CONTROL CABLE ASSEMBLY (for RHD) INSTALLATION


  1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. Connect the cable to the clamps shown in the illustration to install the cable.

      A015AWD

  2. INSTALL FUEL FILLER OPENING LID LOCK RETAINER


    1. A0157M6

      Install the lock retainer and turn it clockwise as shown in the illustration.

    2. A015D80

      Install the cable and turn it clockwise as shown in the illustration.

  3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. A015ABU

      Connect the fuel lid lock control cable to the fuel lid lock open lever.

    2. Attach the 2 claws to install the fuel lid lock open lever.

  4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    A015DJL

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. w/o Rear Air Conditioning System:

        Connect the rear seat lock control lever cable.

      2. w/ Rear Air Conditioning System:

        Connect the thermistor connector and rear seat lock control lever cable.

      3. Attach the 16 clips and 2 claws to install the quarter trim panel.

      4. Install the clip and bolt.

        Torque:
        12 N*m  { 122 kgf*cm, 9 ft.*lbf }
        A0156CN

    2. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:


      1. Attach the 16 clips and 2 claws to install the quarter trim panel.

      2. Install the clip.

        A0157MJ

    3. w/ Tonneau Cover:


      1. Attach the 16 clips and 2 claws to install the quarter trim panel.

      2. Install the screw and clip.

        A0158OA
    4. A015C42

      w/ Rear No. 2 Seat, except Face to Face Seat Type:


      1. Install the rear No. 2 seat belt anchor with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      2. A015DRR

        Attach the 3 claws to install the cover.

    5. A015CPR

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    6. A0157CJ

      Attach the 3 claws to install the cover.

  5. INSTALL NO. 1 REAR SEAT COVER BEZEL (w/ Rear No. 2 Seat)

    Tech Tips

    Use the same procedures described for the rear No. 2 seat cover bezel.

  6. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

    A015DVZ

    Tech Tips

    Use the same procedure to install the tonneau cover holder cap on the other side.


    1. Attach the 2 claws to install the tonneau cover holder cap.

  7. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    A015BES

    1. Attach the 6 clips to install the support plate.

  8. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  9. INSTALL REAR STEP COVER

    A0159DZ

    Tech Tips

    Use the same procedure to install the step cover on the other side.


    1. Attach the 2 claws to install the step cover.

  10. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  11. INSTALL COWL SIDE TRIM BOARD RH

    A015D0K

    1. Attach the 2 clips to install the cowl side trim board.

    2. Install the cap nut.

  12. INSTALL INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

    A015ASI

    1. Attach the 6 claws to install the instrument side panel.

  13. INSTALL INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

    A01569W

    1. Connect the connector.

    2. Attach the 6 claws to install the instrument side panel.

  14. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Install the tonneau cover assembly.

  15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.