AIR CONDITIONING AMPLIFIER INSTALLATION

Tech Tips


  • Use the same procedures for the LHD vehicle and RHD vehicle.

  • The procedures listed below are for the LHD vehicle.


  1. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY

    A015A2R

    1. Install the amplifier with the screw.

    2. Connect the connector.

  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    A015825

    1. Connect the connector.

    2. Attach the 3 claws to install the lower No. 2 instrument panel finish panel.

    3. Install the 4 bolts.

  3. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    A015BUR

    1. Attach the 6 claws to install the No. 3 instrument cluster finish panel garnish.

  4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)


    1. A015670E01

      Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Attach the 4 claws to install the front passenger side knee airbag.

    3. Install the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  5. INSTALL LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)

    A015CSS

    1. Attach the 4 claws to install the lower instrument panel.

    2. Install the 2 bolts.

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    A015C2F

    1. Attach the 4 claws to install the No. 2 instrument panel under cover.

  7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    A015BRH

    1. Attach the 7 claws to install the lower instrument panel pad sub-assembly.

    2. Install the clip and screw.

  8. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

    A01556Z

    1. Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.

  9. INSTALL FRONT DOOR SCUFF PLATE RH


    1. w/ Sliding Roof:

      Click here

    2. w/o Sliding Roof:

      Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  11. CHECK SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)

    Click here