Click here

NAVIGATION ANTENNA (for Instrument Panel Side) REMOVAL

Click here
Click here Click here
  1. Click here

    PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  2. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. Click here

    REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    (Click here)

  4. Click here

    REMOVE NAVIGATION ANTENNA ASSEMBLY


    1. for LHD:


      1. A015B3I

        Detach the 2 clamps.

      2. Remove the 2 screws and navigation antenna assembly.

    2. for RHD:


      1. A0157FU

        Detach the 2 clamps.

      2. Remove the 2 screws and navigation antenna assembly.