Click here

STEREO JACK ADAPTER ASSEMBLY INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL HEADPHONE TERMINAL


    1. A0156RJ

      Attach the 4 claws to install the headphone terminal.

    2. A01576UE01

      Install the 2 screws.

    3. Attach the connector clamp.

  2. Click here

    INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. A0156UJ

      Connect the connectors and 2 clamps.

    2. Attach the 8 claws to install the end panel.

  3. Click here

    INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. A015BEH

      Attach the 2 claws to install the stereo jack adapter.

  4. Click here

    INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A015CZ0

      Connect the connectors.

    2. Attach the 14 claws to install the console panel.

  5. Click here

    INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A015CM5

      Attach the 4 claws to install the box.

  6. Click here

    INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A015C68

      Attach the 9 claws to install the panel.

  7. Click here

    INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01574Y

      Connect the connectors.

    2. Attach the 7 claws to install the panel.

  8. Click here

    INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A015D7FE01

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  9. Click here

    INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A015BRH

      Attach the 7 claws to install the panel pad.

    2. Install the screw.

    3. Install the clip.

  10. Click here

    INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. A01556Z

      Attach the 7 claws to install the panel cushion.

  11. Click here

    INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A015D40

      Connect the connectors and 2 clamps.

    2. Attach the 8 claws to install the panel pad.

    3. Install the screw.

    4. Install the clip.

  12. Click here

    INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. A015DQB

      Attach the 7 claws to install the panel cushion.

  13. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).