BACK DOOR SPEAKER INSTALLATION


  1. INSTALL REAR HEADER SPEAKER ASSEMBLY


    1. A0156UE

      Connect the connector.

    2. Install the rear header speaker assembly with the 3 screws.

  2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


    1. Attach the 16 clips to install the back door trim panel assembly.

    2. Install the 4 bolts.

  3. INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)


    1. Attach the 2 claws to install the door opening switch sub-assembly.

  4. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)


    1. Connect the connector.

    2. Attach the 4 claws to install the No. 2 back door service hole cover.

  5. INSTALL ASSIST GRIP (for Face to Face Seat Type)


    1. Install the assist grip with the 2 screws.

  6. INSTALL BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tech Tips

      Use the same procedure described for the LH side.

    2. w/ Power Back Door:


      1. Attach the clip and 4 claws to install the back door side garnish RH.

  7. INSTALL BACK DOOR SIDE GARNISH LH


    1. Attach the 3 clips and 2 claws to install the back door side garnish LH.

  8. INSTALL CENTER BACK DOOR GARNISH


    1. Attach the 5 clips and 4 claws to install the center back door garnish.

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.