Click here

BACK DOOR SPEAKER REMOVAL

Click here
Click here Click here
  1. Click here

    PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  2. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. Click here

    REMOVE CENTER BACK DOOR GARNISH


    1. A015C1G

      Detach the 5 clips and 4 claws, and remove the center back door garnish.

  4. Click here

    REMOVE BACK DOOR SIDE GARNISH LH


    1. A015931

      Detach the 3 clips and 2 claws, and remove the back door side garnish LH.

  5. Click here

    REMOVE BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tip:

      Use the same procedure described for the LH side.

    2. A0159ZC

      w/ Power Back Door:


      1. Detach the clip and 4 claws, and remove the back door side garnish RH.

  6. Click here

    REMOVE ASSIST GRIP (for Face to Face Seat Type)


    1. A015CXW

      Remove the 2 screws and assist grip.

  7. Click here

    REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)


    1. A0155CR

      Using a screwdriver, detach the 4 claws and remove the No. 2 back door service hole cover.

    2. Disconnect connector.

  8. Click here

    REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)


    1. A015CF4

      Detach the 2 claws and remove the door opening switch sub-assembly.

  9. Click here

    REMOVE BACK DOOR TRIM PANEL ASSEMBLY


    1. A0155Q0

      Remove the 4 bolts.

    2. Detach the 16 clips and remove the back door trim panel assembly.

  10. Click here

    REMOVE REAR HEADER SPEAKER ASSEMBLY

    Tip:

    Use the same procedure as for the opposite side.


    1. A0156UE

      Remove the 3 screws.

    2. Disconnect the connector and remove the rear header speaker assembly.