REAR DOOR SPEAKER INSTALLATION

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)


    1. A015AYKE01

      Align the speaker to the door position pins labeled A.

    2. Install the speaker with the 2 screws.

      Note

      Do not touch the cone part of the speaker.

    3. Attach the clamp and connect the connector.

  2. INSTALL REAR SPEAKER SET


    1. A0155P1

      Temporarily install the speaker by attaching the claw of the speaker to the door panel.

    2. Install the speaker with the 3 screws.

      Note

      Do not touch the cone part of the speaker.

    3. Connect the connector.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. Connect the connector.

    2. A0157I9

      Connect the rear door lock remote control cable assembly LH and rear door inside locking cable assembly LH to the rear door inside handle sub-assembly LH.

    3. A015D8Q

      Attach the 4 claws and 9 clips to install the rear door trim board sub-assembly LH.

    4. Install the 3 screws.

  4. INSTALL DOOR ASSIST GRIP COVER LH


    1. Attach the 9 claws to install the assist grip cover LH to the rear door trim board sub-assembly LH.

  5. INSTALL REAR DOOR ARMREST BASE PANEL ASSEMBLY LH


    1. Connect the connector.

    2. A01561H

      Attach the 7 claws to install the armrest base panel.

  6. INSTALL REAR DOOR INSIDE HANDLE BEZEL LH


    1. Attach the 4 claws to install the rear door inside handle bezel LH.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.