FRONT DOOR SPEAKER INSTALLATION

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    1. A015915

      Connect the speaker connector.

    2. Install the speaker with the 4 screws.

      Note

      Do not touch the cone part of the speaker.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A015BOB

      Connect the connector.

    2. Connect the front door lock remote control cable assembly LH and front door inside locking cable assembly LH to the front door inside handle sub-assembly LH.

    3. A015803

      Attach the 4 claws and 13 clips to install the front door trim board sub-assembly LH.

    4. Install the 3 screws.

  3. INSTALL DOOR ASSIST GRIP COVER LH


    1. Attach the 8 claws to install the door assist grip cover LH to the front door trim board sub-assembly LH.

  4. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH


    1. Connect the connector.

    2. A015C09

      Attach the 5 claws to install the armrest base panel.

  5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH


    1. A015BHG

      Attach the 4 claws to install the front door inside handle bezel LH.

  6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    1. Attach the clip and claw, and install the front door lower frame bracket garnish LH.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.