RADIO RECEIVER (w/o Stereo Component Amplifier) INSTALLATION


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    1. A0158QL

      Attach the 2 claws to install the hazard warning switch.

  2. INSTALL CLOCK ASSEMBLY


    1. A01574D

      Install the clock with the 2 screws.

  3. INSTALL NO. 1 RADIO BRACKET


    1. A0158R3

      Install the bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  4. INSTALL NO. 2 RADIO BRACKET


    1. A0155FR

      Install the bracket with the 3 bolts.

      Torque:
      3.0 N*m  { 30 kgf*cm, 26 in.*lbf }

  5. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A0158M9

      Install the radio receiver with the 2 screws and 2 bolts.

      Torque:
      Bolt
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER


    1. A01563Z

      Insert the cluster finish panel and attach the 10 claws on its backside to install it.

  7. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    A0157V5

    1. Connect the connector.

    2. Attach the 6 claws to install the No. 4 instrument panel register.

  8. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    A0155N4

    1. Connect the connector.

    2. Attach the 6 claws to install the No. 3 instrument panel register.

  9. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    A015A0J

    1. Attach the 8 claws to install the opening cover.

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.