DUCT TEMPERATURE SENSOR (w/ Heater) REMOVAL

PRECAUTION

Note

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

Note

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE REAR NO. 1 SEAT ASSEMBLY LH
1. for 60/40 Split Seat Type 40 Side:
  
  Click here
2. for 60/40 Split Seat Type 60 Side:
  
  Click here
REMOVE REAR NO. 1 SEAT ASSEMBLY RH
1. for 60/40 Split Seat Type 40 Side:
  
  Click here
2. for 60/40 Split Seat Type 60 Side:
  
  Click here
REMOVE REAR NO. 2 SEAT ASSEMBLY LH
1. for Face to Face Seat Type:
  
  Click here
2. except Face to Face Seat Type:
  
  Click here
REMOVE REAR NO. 2 SEAT ASSEMBLY RH
1. for Face to Face Seat Type:
  
  Click here
2. except Face to Face Seat Type:
  
  Click here
REMOVE REAR DOOR SCUFF PLATE LH
1. w/ Sliding Roof:
  
  Click here
2. w/o Sliding Roof:
  
  Click here
REMOVE REAR DOOR SCUFF PLATE RH
1. w/ Sliding Roof:
  
  Click here
2. w/o Sliding Roof:
  
  Click here
REMOVE REAR FLOOR MAT REAR SUPPORT PLATE
1. w/ Sliding Roof:
  
  Click here
2. w/o Sliding Roof:
  
  Click here
REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
1. Remove the tonneau cover.
REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat)
1. w/ Sliding Roof:
  
  Click here
2. w/o Sliding Roof:
  
  Click here
REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
1. w/ Sliding Roof:
  
  Click here
2. w/o Sliding Roof:
  
  Click here
REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat)
1. w/ Sliding Roof:
  
  Click here
2. w/o Sliding Roof:
  
  Click here
REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH
1. w/ Sliding Roof:
  
  Click here
2. w/o Sliding Roof:
  
  Click here
REMOVE REAR NO. 1 SEAT PROTECTOR
1. Detach the 10 claws and remove the 2 seat protectors.
REMOVE REAR NO. 2 SEAT PROTECTOR
1. Detach the 10 claws and remove the 2 seat protectors.
REMOVE FRONT FLOOR CARPET ASSEMBLY
1. Fold back the floor carpet.
  
  Tech Tips
  
  Fold back the carpet until it is possible to remove the rear No. 6 air duct.
REMOVE REAR NO. 6 AIR DUCT
1. Disconnect the 2 connectors.
2. Remove the 5 screws and duct.
REMOVE DUCT TEMPERATURE SENSOR
1. Detach the 4 claws and remove the 2 sensors.