AIR CONDITIONING PANEL (w/o Multi-display) INSTALLATION

Tech Tips


  • Use the same procedures for the LHD vehicle and RHD vehicle.

  • The procedures listed below are for the LHD vehicle.


  1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect the connectors.

    2. A0158E2

      Insert the radio receiver and attach the 5 claws on its backside.

      Note

      When inserting the radio receiver, do not press the knobs on it.

  2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    A015A00

    1. Connect the connectors.

    2. Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.

  3. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    A015BRH

    1. Attach the 7 claws to install the lower instrument panel pad sub-assembly.

    2. Install the clip and screw.

  4. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    A01556Z

    1. Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.

  5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    A015BUX

    1. Connect the connectors and attach the 2 clamps.

    2. Attach the 8 claws to install the lower instrument panel pad sub-assembly.

    3. Install the clip and screw.

  6. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A0155LC

    1. Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.

  7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. w/ Cassette Tape Player:

      Click here

    2. w/o Multi-display:

      Click here

  8. INSTALL NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL

    A015D19

    1. Connect the connector.

    2. Attach the 10 claws to install the No. 1 center instrument cluster finish panel.

  9. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    A0157V5

    1. Connect the connector.

    2. Attach the 6 claws to install the No. 4 instrument panel register.

  10. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    A0155N4

    1. Connect the connector.

    2. Attach the 6 claws to install the No. 3 instrument panel register.

  11. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    A015A0J

    1. Attach the 8 claws to install the opening cover.

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.