Click here

DECELERATION SENSOR (w/ ABS) REMOVAL

Click here
Click here Click here
  1. Click here

    PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  2. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. Click here

    REMOVE LOWER CONSOLE BOX (w/o Console Box Lid)

    (Click here)

  4. Click here

    REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)

    (Click here)

  5. Click here

    REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

    (Click here)

  6. Click here

    REMOVE DECELERATION SENSOR (for Automatic Transmission)


    1. A01579RE01
      A0159PYE01

      Disconnect the sensor connector, and then detach the clamp from the sensor bracket.

    2. Remove the 2 bolts and sensor.

  7. Click here

    REMOVE DECELERATION SENSOR (for Manual Transmission)


    1. Disconnect the sensor connector, and then detach the clamp from the sensor bracket.

    2. A015DP4E01
      A0155QOE01

      Remove the 2 bolts and sensor.