Click here

FRONT SPEED SENSOR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL FRONT SPEED SENSOR LH


    1. A0158DQ

      Install the speed sensor with the bolt.

      8.5 N*m 87 kgf*cm 75 in.*lbf
      Note:

      • Make sure there are no pieces of iron or other foreign matter attached to the sensor tip.

      • While inserting the speed sensor into the knuckle hole, do not strike or damage the sensor tip.

      • After installing the speed sensor, make sure there is no clearance or foreign matter between the sensor stay part and the knuckle.

      • Make sure there is no foreign matter attached to the speed sensor rotor.

  2. Click here

    INSTALL FRONT SKID CONTROL SENSOR WIRE LH


    1. w/o AHC:


      1. A015BXDE01

        Connect the connector.

      2. Install the harness clamp with the bolt.

        13 N*m 127 kgf*cm 9 ft.*lbf
        Note:

        • When installing the clamp, do not twist the wire harness.

        • Make sure the clamp rotation stopper touches the installation position.

    2. w/ AHC:


      1. A0159JWE01

        Connect the 2 connectors.

      2. Install the harness clamp with the bolt.

        13 N*m 127 kgf*cm 9 ft.*lbf
        Note:

        • When installing the clamp, do not twist the wire harness.

        • Make sure the clamp rotation stopper touches the installation position.

    3. A0158LQ

      Install the 2 harness clamps with the 2 bolts.

      13 N*m 127 kgf*cm 9 ft.*lbf
      Note:

      • When installing the clamps, do not twist the wire harness.

      • Make sure the clamp rotation stopper touches the installation position.

    4. A0158U2

      Install the harness clamp with the nut.

      13 N*m 127 kgf*cm 9 ft.*lbf
      Note:

      • When installing the clamp, do not twist the wire harness.

      • Make sure the clamp rotation stopper touches the installation position.

    5. A015DEXE01

      Install the harness clamp with bolt

      except China
      13 N*m 127 kgf*cm 9 ft.*lbf
      for China
      32 N*m 326 kgf*cm 24 ft.*lbf
      Note:

      Install the bracket so that the rotation stopper touches the knuckle.

    6. Connect the speed sensor connector.

      Note:

      Securely connect the connector.

  3. Click here

    INSTALL FRONT SPEED SENSOR RH


    1. A015CSK

      Install the speed sensor with the bolt.

      8.5 N*m 87 kgf*cm 75 in.*lbf
      Note:

      • Make sure there are no pieces of iron or other foreign matter attached to the sensor tip part.

      • While inserting the speed sensor into the knuckle hole, do not strike or damage the sensor tip part.

      • After installing the speed sensor, make sure there is no clearance or foreign matter between the sensor stay part and the knuckle.

      • Make sure there is no foreign matter attached to the speed sensor rotor.

  4. Click here

    INSTALL FRONT SKID CONTROL SENSOR WIRE RH


    1. w/o AHC:


      1. A015794E01

        Install the skid control sensor clamp with the bolt (labeled A).

        for bolt A
        13 N*m 127 kgf*cm 9 ft.*lbf

      2. Attach the connector to the skid control sensor clamp and then connect the connector.

      3. Install the 2 harness clamps with the 2 bolts.

        13 N*m 127 kgf*cm 9 ft.*lbf
        Note:

        • When installing the clamps, do not twist the wire harness.

        • Make sure the clamp rotation stopper touches the installation position.

    2. w/ AHC:


      1. A015C9WE01

        Install the skid control sensor clamp with the bolt (labeled A).

        for bolt A
        13 N*m 127 kgf*cm 9 ft.*lbf

      2. Attach the connector to the skid control sensor clamp and then connect the connector.

      3. Install the 2 harness clamps with the 2 bolts.

        13 N*m 127 kgf*cm 9 ft.*lbf
        Note:

        • When installing the clamps, do not twist the wire harness.

        • Make sure the clamp rotation stopper touches the installation position.

      4. A0158P7

        Install the harness clamp with the bolt.

        13 N*m 127 kgf*cm 9 ft.*lbf

      5. Connect the connector.

    3. A015C9B

      Install the harness clamp with the nut.

      13 N*m 127 kgf*cm 9 ft.*lbf
      Note:

      • When installing the clamp, do not twist the wire harness.

      • Make sure the clamp rotation stopper touches the installation position.

    4. A015CODE01

      Install the harness clamp with bolt.

      except China
      13 N*m 127 kgf*cm 9 ft.*lbf
      for China
      32 N*m 326 kgf*cm 24 ft.*lbf
      Note:

      Install the bracket so that the rotation stopper touches the knuckle.

    5. Connect the speed sensor connector.

      Note:

      Securely connect the connector.

  5. Click here

    INSTALL FRONT WHEEL

    for Aluminum Wheel
    131 N*m 1336 kgf*cm 97 ft.*lbf
    for Steel Wheel
    209 N*m 2131 kgf*cm 154 ft.*lbf
  6. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  7. Click here

    CHECK SPEED SENSOR SIGNAL


    1. w/ ABS:

      Check the speed sensor signal (Click here).

    2. w/ VSC:

      Check the speed sensor signal (Click here).