HEIGHT CONTROL SENSOR (for Rear Side) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR WHEEL

  3. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. A01597K

      Disconnect the connector and 2 clamps.

    2. A015BE7

      Remove the 2 bolts, nut and sensor.

  4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH


    1. A015B74

      Disconnect the connector and 2 clamps.

    2. A015AO6

      Remove the 2 bolts, nut and sensor.