STARTER REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

    Click here

  4. REMOVE STARTER COVER


    1. A015B9D

      Remove the 3 bolts and starter cover.

  5. REMOVE STARTER ASSEMBLY


    1. A0156WV

      Disconnect the starter connector.

    2. Remove the nut and disconnect the starter wire.

    3. A015E65

      Remove the 2 bolts and starter.

    4. A015E7L

      Remove the flywheel housing side cover.