Click here

KNEE AIRBAG ASSEMBLY (for Front Passenger Side) INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedures for the RHD and LHD.

  • The procedures listed below are the LHD side.

Click here
  1. Click here

    INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY


    1. A015670E01

      Connect the connector.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Attach the 4 claws to install the front passenger side knee airbag.

    3. Install the 4 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
  2. Click here

    INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


    1. Attach the 4 claws to install the No. 2 instrument panel under cover.

  3. Click here

    INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. Attach the 7 claws to install the lower instrument panel pad sub-assembly.

    2. Install the clip and screw.

  4. Click here

    INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION


    1. Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.

  5. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedures described for the LH side.

  6. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  7. Click here

    CHECK SRS WARNING LIGHT


    1. Check the SRS warning light (Click here).