DYNAMIC RADAR CRUISE CONTROL SYSTEM PROBLEM SYMPTOMS TABLE
Tech Tips
-
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
-
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | See page |
|---|---|---|
| The cruise control system cannot be turned on using the cruise control switch (ON-OFF button). | Cruise control switch circuit | |
| Cruise main indicator light circuit | ||
| ECM | ||
| Cannot change between vehicle-to-vehicle distance control mode and constant speed control mode. | Cruise control switch circuit | |
| Combination meter assembly | ||
| ECM | ||
| Set distance cannot be changed. | Distance control switch circuit | |
| Combination meter assembly | ||
| Driving support ECU assembly (for LHD) | ||
| Driving support ECU assembly (for RHD) | ||
| ECM | ||
| Cannot select vehicle-to-vehicle distance control mode. | Combination meter assembly | |
| Millimeter wave radar sensor assembly | ||
| Driving support ECU assembly (for LHD) | ||
| Driving support ECU assembly (for RHD) | ||
| ECM | ||
| Vehicle speed setting cannot be performed. (The cruise control indicator light remains illuminated on the combination meter when cruise control system is turned on using the cruise control switch (ON-OFF button), but turns off when the SET function is operated.) | Cruise control switch circuit | |
| ECM | ||
| Vehicle speed setting cannot be performed with constant speed control mode. (The cruise control indicator light remains illuminated on the combination meter when cruise control system is turned on using the cruise control switch (ON-OFF button), and remains on when the SET function is operated.) | Stop light switch circuit | |
| Vehicle speed sensor circuit | ||
| Cruise control switch circuit | ||
| Transmission control switch circuit (for U660E) | ||
| ECM | ||
| Vehicle speed setting cannot be performed with vehicle-to-vehicle distance control mode. (The cruise control indicator light remains illuminated on the combination meter when cruise control system is turned on using the cruise control switch (ON-OFF button), and remains on when the SET function is operated.) | Millimeter wave radar sensor assembly | |
| Stop light switch circuit | ||
| Vehicle speed sensor circuit | ||
| Cruise control switch circuit | ||
| Transmission control switch circuit (for U660E) | ||
| Wiper signal circuit | ||
| ECM | ||
| While vehicle is driven with the cruise control system controlling vehicle speed, the control of vehicle speed is canceled. | Stop light switch circuit | |
| Transmission control switch circuit (for U660E) | ||
| Vehicle stability control system | ||
| Cruise control switch circuit | ||
| Combination meter assembly | ||
| Vehicle speed sensor circuit | ||
| Wiper signal circuit | ||
| ECM | ||
| Pulling back on the cruise control switch does not cancel vehicle speed control by the cruise control system. (The cruise control indicator light remains illuminated.) | Cruise control switch circuit | |
| Combination meter assembly | ||
| ECM | ||
| Pulling back on the cruise control switch does not cancel vehicle speed control by the cruise control system. (The vehicle-to-vehicle cruise control indicator light goes out.) | ECM | |
| Vehicle speed control by the cruise control system is not canceled when vehicle speed drops below the low speed limit. (The cruise control indicator light remains illuminated.) | Vehicle speed sensor circuit | |
| Combination meter assembly | ||
| ECM | ||
| Vehicle speed control by the cruise control system is not canceled when vehicle speed drops below the low speed limit. (The vehicle-to-vehicle cruise control indicator light goes out.) | ECM | |
| Depressing the brake pedal does not cancel vehicle speed control by the cruise control system. (The cruise control indicator light remains illuminated.) | Stop light switch circuit | |
| Combination meter assembly | ||
| ECM | ||
| Depressing the brake pedal does not cancel vehicle speed control by the cruise control system. (The vehicle-to-vehicle cruise control indicator light goes out.) | ECM | |
| Vehicle speed control by the cruise control system is not canceled when the wipers operate on HI. (The cruise control indicator light remains illuminated.) | Wiper signal circuit | |
| Combination meter assembly | ||
| ECM | ||
| Vehicle speed control by the cruise control system is not canceled when the wipers operate on HI. (The vehicle-to-vehicle cruise control indicator light goes out.) | ECM | |
| Moving the shift lever does not cancel vehicle speed control by the cruise control system. (The cruise control indicator light remains illuminated.) | Stop light switch circuit | |
| Transmission control switch circuit (for U660E) | ||
| Combination meter assembly | ||
| ECM | ||
| Moving the shift lever does not cancel vehicle speed control by the cruise control system. (The vehicle-to-vehicle cruise control indicator light goes out.) | ECM | |
| Hunting (Speed is not constant.) | Vehicle speed sensor circuit | |
| SFI system | ||
| ECM | ||
| Even though the front millimeter wave radar sensor is not dirty, the warning message "CLEAN RADAR SENSOR" is displayed. | Millimeter wave radar sensor assembly is dirty | - |
| Adjust front millimeter wave radar sensor assembly | ||
| Millimeter wave radar sensor assembly | ||
| The beam axis of the millimeter wave radar sensor cannot be adjusted. | Check position, distance and angle of reflector | - |
| Check installation of millimeter wave radar sensor assembly | ||
| Millimeter wave radar sensor assembly | ||
| Driving support ECU assembly (for LHD) | ||
| Driving support ECU assembly (for RHD) | ||
| ECM | ||
| The warning buzzer does not sound. | Skid control buzzer circuit | |
| Vehicle stability control system | ||
| Millimeter wave radar sensor assembly | ||
| ECM | ||
| No brake control (when decelerating) | Vehicle stability control system | |
| ECM | ||
| The vehicle-to-vehicle distance control mode cruise control indicator light remains blinking. | TC and CG terminal circuit | |
| ECM | ||
| The cruise control SET indicator light does not illuminate. (Vehicle speed can be set) | Cruise control SET indicator light circuit | |
| Combination meter assembly | ||
| ECM |