HAZARD WARNING SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION (w/ Navigation System)

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

    Note

    w/ G-BOOK System:

    When removing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

  2. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here

  3. REMOVE LUGGAGE TRIM SERVICE HOLE COVER (w/ Navigation System)

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Navigation System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  7. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  8. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  9. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)

    Click here

  10. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

    Click here

  11. REMOVE NO. 1 RADIO BRACKET (w/o Navigation System)

    Click here

  12. REMOVE NO. 2 RADIO BRACKET (w/o Navigation System)

    Click here

  13. REMOVE RADIO RECEIVER ASSEMBLY (HAZARD SWITCH) (w/o Navigation System)

  14. REMOVE NO. 1 RADIO BRACKET (w/ Navigation System)

    Click here

  15. REMOVE NO. 2 RADIO BRACKET (w/ Navigation System)

    Click here

  16. REMOVE HARD DISK DRIVE (w/ Navigation System)

    w/ G-BOOK System: Click here

  17. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (HAZARD SWITCH) (w/ Navigation System)