RADIO RECEIVER REMOVAL

PROCEDURE


  1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. A0006A4

      Remove the 4 bolts.

    2. A00043X

      Pull the radio receiver assembly with bracket toward the rear of the vehicle and disengage the 2 clips and 2 claws.

    3. Disconnect each connector and remove the radio receiver assembly with bracket.

  7. REMOVE NO. 1 RADIO BRACKET


    1. A0003PD

      Remove the 4 screws and No. 1 radio bracket.

  8. REMOVE NO. 2 RADIO BRACKET


    1. A0004UD

      Remove the 4 screws and No. 2 radio bracket.

  9. REMOVE RADIO RECEIVER ASSEMBLY