WIPER ECU INSTALLATION

PROCEDURE

1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

   
   

   1. Connect the connector.

   2. Install the windshield wiper relay assembly with the nut.

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

3. INSTALL INSTRUMENT PANEL BOX DOOR COVER

   Click here

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

7. INSTALL FRONT DOOR OPENING TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

8. INSTALL COWL SIDE TRIM BOARD RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

9. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

11. CONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

12. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

13. INSPECT SRS WARNING LIGHT

    Click here