GLOVE BOX LIGHT INSTALLATION

PROCEDURE

1. INSTALL GLOVE BOX LIGHT ASSEMBLY

   
   

   1. 

      Lift and turn the glove box light assembly in the direction indicated by the arrow shown in the illustration to install it.

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

3. INSTALL INSTRUMENT PANEL BOX DOOR COVER

   Click here

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

7. INSTALL FRONT DOOR OPENING TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

8. INSTALL COWL SIDE TRIM BOARD RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

9. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

12. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

13. INSPECT SRS WARNING LIGHT

    Click here