CLEARANCE WARNING ECU(for LHD) INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL CLEARANCE WARNING ECU ASSEMBLY

   
   

   1. Engage the 2 claws to install the clearance warning ECU assembly.

2. Click here

   INSTALL ECU INTEGRATION BOX RH

   
   

   1. Install the ECU integration box RH with the bolt and 2 nuts.

      Nut
      5.5 N*m	56 kgf*cm	49 in.*lbf
      Bolt
      7.5 N*m	76 kgf*cm	66 in.*lbf

   2. Connect each connector.

3. Click here

   INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

4. Click here

   INSTALL INSTRUMENT PANEL BOX DOOR COVER

   Click here

5. Click here

   INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

6. Click here

   INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

7. Click here

   INSTALL INSTRUMENT SIDE PANEL RH

   Click here

8. Click here

   INSTALL FRONT DOOR OPENING TRIM COVER RH

   Tip:

   Use the same procedure as for the LH side (Click here).

9. Click here

   INSTALL COWL SIDE TRIM BOARD RH

   Tip:

   Use the same procedure as for the LH side (Click here).

10. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side (Click here).

11. Click here

    INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

12. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

13. Click here

    INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

14. Click here

    INSPECT SRS WARNING LIGHT

    (Click here)