AUDIO AND VISUAL SYSTEM(for 8 Speakers) Disc cannot be Inserted or is Ejected Right After Insertion

PROCEDURE

1. Click here

   CHECK IF A PROPER DISC IS INSERTED

   
   

   1. Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      CD is normal.

      Tip:
      

      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs and DVDs with adhesive paper labels should not be played.

      • Commercial audio CDs and DVDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs and DVDs, refer to the Owner's Manual.

   
   
   • OKClick here
   • NG

     CHANGE DISC

2. Click here

   CHECK THAT DISC IS INSERTED PROPERLY

   
   

   1. Check if the disc is inserted upside down.

      OK
      Disc is properly inserted.

   
   
   • OKClick here
   • NG

     INSERT DISC PROPERLY

3. Click here

   CLEAN DISC AND RECHECK

   
   
   1. 

      Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.

      OK
      Malfunction disappears.

      Note:

      Do not use a conventional record cleaner or anti-static preservative.

   
   
   • OK

     END (DISC WAS DIRTY)

   • NGClick here
4. Click here

   REPLACE DISC AND RECHECK

   
   

   1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

   
   
   • OK

     END (DISC WAS FAULTY)

   • NG

     REPLACE RADIO RECEIVER ASSEMBLY (Click here)