PARKING BRAKE PEDAL(for LHD) REMOVAL

PROCEDURE


  1. REMOVE SHIFT LEVER SUPPORT

    Click here

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  3. REMOVE FLOOR CARPET BRACKET RH

    Click here

  4. REMOVE AIRBAG SENSOR ASSEMBLY

    Click here

  5. REMOVE POWER MANAGEMENT CONTROL ECU

    Click here

  6. LOOSEN ADJUSTING NUT


    1. A000865E04
      Text in Illustration
      *1 Lock Nut
      *2 Adjusting Nut

      Remove the lock nut and loosen the adjusting nut.

  7. SEPARATE NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. A0006VTE05
      Text in Illustration
      *a Turn
      *b Hold

      Separate the No. 4 parking brake cable assembly from the parking brake pedal sub-assembly as shown in the illustration.

  8. REMOVE PARKING BRAKE PEDAL SUB-ASSEMBLY


    1. Turn back the floor carpet.

    2. A0003U0

      Remove the clip from the No. 1 parking brake cable assembly.

    3. Remove the bolt and 2 nuts, and separate the No. 1 parking brake cable assembly.

    4. A0009A7

      Disconnect the parking brake switch assembly connector.

    5. A0005C3

      Remove the bolt, 2 nuts and parking brake pedal sub-assembly.