COOLER EXPANSION VALVE REMOVAL

CAUTION / NOTICE / HINT

Note

When removing the cooler expansion valve by itself, be sure to install a new cooler expansion valve and new bolt for the suction pipe sub-assembly.

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  3. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY

    Click here

  4. DISCONNECT NO. 1 BRAKE ACTUATOR TUBE

    Click here

  5. DISCONNECT SUCTION PIPE SUB-ASSEMBLY

    Click here

  6. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY

    Click here

  7. REMOVE COOLER EXPANSION VALVE


    1. A0008BM

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.

    2. A0006ZNE03
      Text in Illustration
      *a Bolt for Suction Pipe Sub-assembly

      Temporarily install the bolt for the suction pipe sub-assembly halfway to the cooler expansion valve.

    3. A000676

      Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.

    4. A0004XNE03
      Text in Illustration
      *1 No. 1 Cooler Evaporator Sub-assembly

      Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.