PROCEDURE
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
Remove the nut and front wiper arm and blade assembly LH.
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
Remove the nut and front wiper arm and blade assembly RH.
REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
Disengage the claw and separate the windshield outside moulding LH.
Disengage the claw and separate the windshield outside moulding RH.
Disengage the 6 claws and guide as shown in the illustration.
Disengage the 8 guides and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.
REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
Remove the 2 bolts.
*1 | Motor Grommet |
Disconnect the connector.
Disengage the motor grommet and remove the windshield wiper motor and link assembly as shown in the illustration.
Note
Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.
REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
*1 | Protective Tape |
*2 | Windshield Wiper Link No. 1 Rod |
*a | Pivot of the windshield wiper motor assembly |
Using a screwdriver, separate the windshield wiper link No. 1 rod from the pivot of the windshield wiper motor assembly as shown in the illustration.
Tech Tips
Tape the screwdriver tip before use.
Using a T30 "TORX" socket wrench, remove the 2 bolts and windshield wiper motor assembly from the windshield wiper link assembly.