БЛОК СЦЕПЛЕНИЯ (для моделей с 1AD-FTV, 2AD-FHV) СНЯТИЕ


  1. REMOVE MANUAL TRANSAXLE ASSEMBLY


    1. for 1AD-FTV:

      Remove the manual transaxle assembly Click here.

    2. for 2AD-FHV:

      Remove the manual transaxle assembly Click here.

  2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY


    1. A01IONS

      Remove the clutch release fork with the clutch release bearing from the manual transaxle assembly.

  3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY


    1. A01IO1Z

      Remove the clutch release bearing and clip from the clutch release fork.

  4. REMOVE RELEASE FORK SUPPORT


    1. A01IO0U

      Remove the release fork support from the manual transaxle assembly.

      Tech Tips

      If there is adhesive on the threaded portion of the release fork support, replace a release fork support and clean the threaded potion of the housing.

  5. REMOVE CLUTCH RELEASE FORK BOOT


    1. A01ITANE01

      Remove the clutch release fork boot from the manual transaxle assembly.

  6. REMOVE CLUTCH COVER ASSEMBLY


    1. A01IRLCE01
      Text in Illustration
      *1 Matchmark

      Place matchmarks on the clutch cover and flywheel.

    2. Loosen each set bolt 180° at a time until the spring tension is released.

      Note

      Be sure to uniformly loosen the bolts 180° at a time according to the order in the illustration.

    3. Remove the set bolts and pull off the clutch cover to remove it.

      Note

      Do not drop the clutch disc.

  7. REMOVE CLUTCH DISC ASSEMBLY

    Note

    Keep the lining part of the clutch disc, the pressure plate, and the surface of the flywheel away from oil and foreign matter.