POWER SWITCH REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

   Click here

3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

   Click here

5. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

   Click here

6. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

7. REMOVE COWL SIDE TRIM BOARD LH

   Click here

8. REMOVE FRONT DOOR OPENING TRIM COVER LH

   Click here

9. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

10. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

11. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

12. REMOVE SWITCH BASE

    Click here

13. REMOVE POWER SWITCH

    
    

    1. Disengage the 2 claws and remove the power switch.

       

       Text in Illustration

       *A

       for LHD

       *B

       for RHD