WASHER MOTOR REMOVAL

Info Added 2017-10-06

PROCEDURE


  1. REMOVE FRONT WHEEL RH

    Click here

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    1. A005ORU

      Remove the 5 screws and front wheel opening extension pad RH.

  3. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH

    Click here

  4. REMOVE ROCKER PANEL MOULDING RH

    Click here

  5. REMOVE FRONT FENDER LINER RH


    1. A005P0N

      Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clips.

    2. Remove the 6 screws, 6 clips and front fender liner RH.

      A005OUJ

  6. DRAIN WASHER FLUID


    1. A005QDF

      Disconnect the rear washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  7. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A005P1WC01
      B00497S Remove in this Direction

      Disconnect the washer hose.

    2. Disconnect the connector.

    3. Remove the windshield washer motor and pump assembly as shown in the illustration.