Info Added 2017-10-06
PROCEDURE
REMOVE WHEEL ASSEMBLY
for 17 inch Steel Wheel:
Remove the wheel cap.
for 16 inch Aluminum Wheel:
Fastening Tape | |
Place Hands Here | |
Remove in this Direction |
Disengage the claws, fastening tapes and pins to remove the wheel cap as shown in the illustration.
CAUTION:
*1 | Wheel Cap |
Do not remove or carry the wheel assembly with the wheel cap still installed.
The wheel cap could detach and cause injury or damage.
Note
When removing the wheel cap, disengage each location where your hands are placed one by one, and do not attempt to disengage everything at once.
Tech Tips
When replacing the disc wheel, also replace the wheel cap with a new one.
Loosen the axle hub nuts approximately 90°.
Lift up the vehicle and remove the axle hub nuts and wheel assembly.