PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE


  1. SECURE VEHICLE


    1. Fully apply the parking brake and chock a wheel.

      CAUTION:


      • A005QBY

        Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

  2. REMOVE RADIATOR COVER

    Click here

  3. REMOVE NO. 1 AIR CLEANER INLET

    Click here

  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  6. ADJUST PARK/NEUTRAL POSITION SWITCH


    1. A001TII

      Loosen the 2 bolts of the park/neutral position switch.

    2. A001XT1C02
      *a Neutral Basic Line
      *b Protrusion

      Align the protrusion with the neutral basic line.

    3. Hold the park/neutral position switch in that position and tighten the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  7. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  8. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  9. INSTALL NO. 1 AIR CLEANER INLET

    Click here

  10. INSTALL RADIATOR COVER

    Click here

  11. INSPECT PARK/NEUTRAL POSITION SWITCH

    Click here