FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  3. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  4. REMOVE REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH

    Click here

  5. REMOVE FAN AND GENERATOR V BELT

    Click here

  6. REMOVE CRANKSHAFT PULLEY


    1. A001UZSC08
      *a Hold
      *b Turn

      Using SST to hold the crankshaft pulley, loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

      SST
      09213-54015   ( 91551-00850 )
      09330-00021
    2. A001W79C01
      *a Hold
      *b Turn

      Using SST, remove the crankshaft pulley and crankshaft pulley set bolt. Further loosen the bolt until 2 or 3 threads are screwed into the crankshaft.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )

      Tech Tips

      Apply lubricant to the threads and end of SST.

  7. REMOVE TIMING CHAIN COVER OIL SEAL


    1. A001YDBC04
      *a Protective Tape

      Using a screwdriver, pry out the timing chain cover oil seal.

      Note

      After removal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.