REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE TONNEAU COVER ASSEMBLY

    Click here

  2. REMOVE REAR NO. 2 FLOOR BOARD

    Click here

  3. REMOVE REAR NO. 4 FLOOR BOARD

    Click here

  4. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  5. REMOVE REAR NO. 1 FLOOR BOARD

    Click here

  6. REMOVE DECK FLOOR BOX LH

    Click here

  7. REMOVE DECK FLOOR BOX RH

    Click here

  8. REMOVE DECK TRIM SERVICE HOLE COVER

    Click here

  9. REMOVE REAR DECK TRIM COVER

    Click here

  10. REMOVE REAR SEAT HEADREST ASSEMBLY (for LH Side)

    Click here

  11. REMOVE REAR SEAT HEADREST ASSEMBLY (for RH Side)

    Click here

  12. REMOVE REAR SEATBACK ASSEMBLY LH (for LH Side)

    Click here

  13. REMOVE REAR SEATBACK HINGE COVER (for RH Side)

    Click here

  14. REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side)

    Click here

  15. REMOVE REAR SEAT CUSHION ASSEMBLY LH (for LH Side)

    Click here

  16. REMOVE REAR SEAT CUSHION ASSEMBLY RH (for RH Side)

    Click here

  17. REMOVE REAR SEAT CUSHION LOCK HOOK

    Click here

  18. REMOVE REAR DOOR SCUFF PLATE

    Click here

  19. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

    Click here

  20. REMOVE REAR UNDER SIDE COVER

    Click here

  21. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY

    Click here

  22. REMOVE REAR SEAT SIDE GARNISH

    Click here

  23. REMOVE ROPE HOOK (w/o Toyota Safety Sense)

    Click here

  24. REMOVE NO. 2 ROPE HOOK (w/o Toyota Safety Sense)

    Click here

  25. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Toyota Safety Sense)

    Click here

  26. REMOVE TONNEAU COVER HOOK A (w/ Toyota Safety Sense)

    Click here

  27. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for RH Side)

    Click here

  28. REMOVE DECK TRIM SIDE PANEL ASSEMBLY

    Click here

  29. REMOVE REAR COMBINATION LIGHT COVER


    1. A003LVQC01
      B006J86 Insert Moulding Remover Here
      B006IFV Remove in this Direction

      Using a moulding remover, disengage the 4 claws as shown in the illustration.

    2. A003L94C01
      B006IFV Remove in this Direction

      Disengage the 2 claws to remove the rear combination light cover as shown in the illustration.

  30. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A003NII

      Disconnect the connector.

    2. A003OMEC01
      B006IOI Protective Tape

      Apply protective tape around the rear combination light assembly as shown in the illustration.

    3. A003LXL

      Remove the 2 screws.

    4. A003L83C01
      *a Pin
      *b Guide
      B006IFV Remove in this Direction

      Pull the rear combination light assembly toward the rear of the vehicle as shown in the illustration to disengage the pin and 2 guides and separate the rear combination light assembly.

      Note

      To prevent the rear combination light assembly from falling when disengaging the pins and guides, lightly hold the rear combination light assembly.

    5. A003L5S

      Disengage the grommet to remove the rear combination light assembly.