AIRBAG SYSTEM, Diagnostic DTC:B1625/22, B1627/82

DTC Code DTC Name
B1625/22 Side Airbag Sensor LH Circuit Malfunction
B1627/82 Lost communication with Side Airbag Sensor LH

DESCRIPTION

The side collision sensor LH circuit (to determine deployment of the front seat airbag assembly LH, curtain shield airbag assembly LH and front seat outer belt assembly LH) is composed of the airbag sensor assembly, side airbag sensor assembly LH, rear airbag sensor LH and door side airbag sensor LH.

The side airbag sensor assembly LH, rear airbag sensor LH and door side airbag sensor LH detect impacts to the vehicle and send signals to the airbag sensor assembly to determine if the airbags and pretensioner should be deployed.

These DTCs are stored when a malfunction is detected in the side airbag sensor assembly LH.

DTC No. Detection Item DTC Detection Condition Trouble Area Test Mode / Check Mode
B1625/22 Side Airbag Sensor LH Circuit Malfunction

  • Side airbag sensor assembly LH malfunction

  • Airbag sensor assembly malfunction

  • Side airbag sensor assembly LH

  • Airbag sensor assembly

 Does not apply to test/check mode
B1627/82 Lost communication with Side Airbag Sensor LH

  • Side airbag sensor assembly LH malfunction

  • Airbag sensor assembly malfunction

  • Side airbag sensor assembly LH

  • Airbag sensor assembly

 Does not apply to test/check mode

WIRING DIAGRAM

A01MHQWE02
*a Side Airbag Sensor Assembly LH
*b Door Side Airbag Sensor LH
*c Rear Airbag Sensor Assembly LH
*d Airbag Sensor Assembly

CAUTION / NOTICE / HINT

Note

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click here

PROCEDURE


  1. CHECK DTC


    1. Turn the power switch on (IG), and wait for at least 60 seconds.

    2. Clear the DTCs stored in memory.

      Click here


      Body Electrical > SRS Airbag > Clear DTCs

    3. Turn the power switch off.

    4. Turn the power switch on (IG), and wait for at least 60 seconds.

    5. Check for DTCs.

      Click here


      Body Electrical > SRS Airbag > Trouble Codes
      Result
      Result Proceed to
      DTC B1625/22 or B1627/82 is output A
      DTC B1625/22 or B1627/82 is not output B

      Tech Tips

      Codes other than DTCs B1625/22 and B1627/82 may be output at this time, but they are not related to this check.


    B

    USE SIMULATION METHOD TO CHECK Click here

    A

  2. CHECK SIDE AIRBAG SENSOR ASSEMBLY LH


    1. A01MGB6C01
      *1 Side Airbag Sensor Assembly RH
      *2 Rear Airbag Sensor LH

      Turn the power switch off.

    2. Disconnect the cable from the negative (-) auxiliary battery terminal and wait for at least 90 seconds.

    3. Interchange the side airbag sensor assembly LH with RH and connect the connectors.

    4. Connect the cable to the negative (-) auxiliary battery terminal.

    5. Clear the DTCs stored in memory.

      Click here


      Body Electrical > SRS Airbag > Clear DTCs

    6. Turn the power switch off.

    7. Turn the power switch on (IG), and wait for at least 60 seconds.

    8. Check for DTCs.

      Click here


      Body Electrical > SRS Airbag > Trouble Codes
      Result
      Result Proceed to
      DTC B1625/22 or B1627/82 is output A
      DTC B1620/21 or B1622/81 is output B
      DTCs B1620/21, B1622/81, B1625/22 and B1627/82 are not output C

      Tech Tips

      Codes other than DTCs B1620/21, B1622/81, B1625/22 and B1627/82 may be output at this time, but they are not related to this check.

    9. Turn the power switch off.

    10. Disconnect the cable from the negative (-) auxiliary battery terminal and wait for at least 90 seconds.

    11. Return the side airbag sensor assembly LH and RH to their original positions and connect the connectors.


    A

    REPLACE AIRBAG SENSOR ASSEMBLY Click here

    B

    REPLACE SIDE AIRBAG SENSOR ASSEMBLY LH Click here

    C

    USE SIMULATION METHOD TO CHECK Click here