HYDROGEN FUEL CONTROL ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here

  2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

  4. REMOVE REAR SEAT ASSEMBLY

    Click here

  5. REMOVE HYDROGEN FUEL CONTROL ECU ASSEMBLY


    1. A01MK33

      Disconnect the hydrogen fuel control ECU assembly connector.

    2. A01MIY1

      Remove the 2 bolts.

    3. A01MFSV

      Disengage the 2 hooks and remove the hydrogen fuel control ECU assembly from the vehicle.

      Note

      If the hydrogen fuel control ECU assembly dropped or subjected to a strong impact, replace it with a new one.