PRESSURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL NO. 1 PRESSURE SWITCH

   
   

   1. 

      *a	Turn
      *b	Hold

      Remove the vinyl tape from the air conditioner tube and accessory assembly and the connecting part of the No. 1 pressure switch.

   2. Apply sufficient compressor oil to the O-ring of a new No. 1 pressure switch and the connecting surface.

      Compressor Oil
      ND-OIL 8 or equivalent

      Note

      Keep the O-ring and O-ring fitting surfaces free of foreign matter.

   3. Using a 27 mm deep socket wrench, install the No. 1 pressure switch.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

   4. 

      Connect the connector.

2. INSTALL AIR CLEANER CASE

   
   

   1. for 1GR-FE:

      Click here

   2. for 1GD-FTV:

      Click here

   3. for 2GD-FTV:

      Click here

   4. for 1KD-FTV:

      Click here

   5. for 2KD-FTV:

      Click here

   6. for 1TR-FE:

      Click here

   7. for 2TR-FE:

      Click here

   8. for 5L-E:

      Click here

3. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   
   

   1. for 1GR-FE:

      Click here

   2. for 1GD-FTV:

      Click here

   3. for 2GD-FTV:

      Click here

   4. for 1KD-FTV:

      Click here

   5. for 2KD-FTV:

      Click here

   6. for 1TR-FE:

      Click here

   7. for 2TR-FE:

      Click here

   8. for 5L-E:

      Click here

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE

   
   

   1. for 1GR-FE:

      Click here

   2. for 1GD-FTV:

      Click here

   3. for 2GD-FTV:

      Click here

   4. for 1KD-FTV:

      Click here

   5. for 2KD-FTV:

      Click here

   6. for 1TR-FE:

      Click here

   7. for 2TR-FE:

      Click here

   8. for 5L-E:

      Click here

5. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

   Click here

6. WARM UP ENGINE

   Click here

7. INSPECT FOR REFRIGERANT LEAK

   Click here