PRE-CRASH SAFETY SYSTEM WARNING BUZZER(for RHD) INSTALLATION

PROCEDURE

1. INSTALL SKID CONTROL BUZZER

   Note

   If the skid control buzzer assembly has been struck or dropped, replace it with a new one.

   
   

   1. Connect the connector.

   2. Attach the clamp to install the skid control buzzer.

      Tech Tips

      Make sure to install the skid control buzzer assembly in the correct direction.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. CHECK SRS WARNING LIGHT

   for Type A:

   Click here

   for Type B:

   Click here

   for Type C:

   Click here