Click here

MANUAL TRANSMISSION ASSEMBLY INSTALLATION

Click here
Click here Click here

PROCEDURE


  1. Click here

    INSTALL EXTENSION HOUSING DUST DEFLECTOR


    1. B00270JN01

      Using SST and hammer, tap in the extension housing dust deflector.

      09513-36040
  2. Click here

    INSTALL WIRING HARNESS CLAMP BRACKET


    1. B00266DC03
      *A w/ Intelligent Manual Transmission Switch

      Install the 6 bolts and 5 wiring harness clamp brackets to the manual transmission assembly.

      13 N*m 133 kgf*cm 10 ft.*lbf
  3. Click here

    INSTALL TRANSMISSION BREATHER SUB-ASSEMBLY


    1. B0028WXN05

      Install the 3 bolts and 3 brackets to the manual transmission assembly.

      bolt A
      13 N*m 133 kgf*cm 10 ft.*lbf
      bolt B
      19.0 N*m 194 kgf*cm 14 ft.*lbf
    2. B0028RP

      Install the transmission breather sub-assembly to the control shift lever retainer sub-assembly.

    3. Attach the 4 breather hose clamps.

  4. Click here

    INSTALL MANUAL TRANSMISSION ASSEMBLY


    1. B0027CS

      Install the manual transmission assembly with the 5 bolts.

      71.5 N*m 729 kgf*cm 53 ft.*lbf
  5. Click here

    CONNECT WIRE HARNESS


    1. A01SILN

      w/ Intelligent Manual Transmission Switch:


      1. Connect the 2 connectors.

      2. Install the bolt.

        13 N*m 133 kgf*cm 10 ft.*lbf

      3. Attach the 6 wire harness clamps.

    2. A01SJNF

      w/o Intelligent Manual Transmission Switch:


      1. Connect the connector.

      2. Install the bolt.

        13 N*m 133 kgf*cm 10 ft.*lbf

      3. Attach the 3 wire harness clamps.

  6. Click here

    INSTALL REAR ENGINE MOUNTING INSULATOR


    1. B0024KG

      Install the rear engine mounting insulator to the manual transmission assembly with the 4 bolts.

      47 N*m 479 kgf*cm 35 ft.*lbf
  7. Click here

    INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY


    1. B0024SA

      Install the No. 3 frame crossmember sub-assembly with the 4 nuts and 4 bolts.

      57 N*m 581 kgf*cm 42 ft.*lbf
    2. B0024D5

      Install the 4 bolts to the No. 3 frame crossmember sub-assembly.

      18.5 N*m 189 kgf*cm 14 ft.*lbf
  8. Click here

    CONNECT GROUND CABLE


    1. B0028FC

      Connect the ground cable with the bolt.

      19.5 N*m 199 kgf*cm 14 ft.*lbf
  9. Click here

    INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY

    Click here

  10. Click here

    INSTALL STIFFENER PLATE LH


    1. Install the stiffener plate LH with the 4 bolts.

      71.5 N*m 729 kgf*cm 53 ft.*lbf
  11. Click here

    INSTALL STIFFENER PLATE RH


    1. Install the stiffener plate RH with the 4 bolts.

      71.5 N*m 729 kgf*cm 53 ft.*lbf
  12. Click here

    INSTALL NO. 4 CYLINDER BLOCK INSULATOR


    1. Install the No. 4 cylinder block insulator.

  13. Click here

    INSTALL STARTER ASSEMBLY (for 1GD-FTV)


    1. for 2.0 kW Type:

      Click here

    2. for 2.2 kW Type

      Click here

  14. Click here

    INSTALL STARTER ASSEMBLY (for 2GD-FTV)


    1. for 2.0 kW Type:

      Click here

    2. for 2.2 kW Type:

      Click here

    3. for 2.7 kW Type:

      Click here

  15. Click here

    INSTALL STARTER ASSEMBLY (for 2KD-FTV)


    1. for 2.0 kW Type:

      Click here

    2. for 2.2 kW Type:

      Click here

  16. Click here

    INSTALL FRONT EXHAUST PIPE ASSEMBLY (for 1GD-FTV)

    Click here

  17. Click here

    INSTALL FRONT EXHAUST PIPE ASSEMBLY (for 2GD-FTV)

    Click here

  18. Click here

    INSTALL FRONT EXHAUST PIPE ASSEMBLY (for 2KD-FTV)

    Click here

  19. Click here

    ADD MANUAL TRANSMISSION OIL

    Click here

  20. Click here

    INSTALL NO. 2 ENGINE UNDER COVER

    Click here

  21. Click here

    INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  22. Click here

    INSTALL NO. 1 FLOOR SHIFT BUSH


    1. Install the No. 1 floor shift bush to the floor shift shift lever assembly.

  23. Click here

    INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY


    1. B00246BC01
      B0068HS MP grease

      Apply MP grease to the tip of the floor shift shift lever assembly.

    2. B0025SXC02
      *1 Shift Lever Cap
      *a Press Down
      *b Clockwise
      *c Lock

      Cover the shift lever cap with a cloth.

    3. While pressing down on the shift lever cap, turn it clockwise to install the floor shift shift lever assembly.

    4. Attach the shift lever cap boot.

  24. Click here

    INSTALL SHIFT LEVER BOOT ASSEMBLY


    1. Install the shift lever boot assembly with the 6 screws and 4 clips.

  25. Click here

    INSTALL CONSOLE BOX ASSEMBLY (w/ Console Box Lid)

    Click here

  26. Click here

    INSTALL FRONT CONSOLE BOX (w/o Console Box Lid)

    Click here

  27. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here