MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY


  2. REMOVE MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. A01SCDFN01

      Using SST, tap out the manual transmission extension housing oil seal.

      SST
      09308-00010

  3. INSTALL MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. A01SBT8N01

      Using SST and hammer, tap in the manual transmission extension housing oil seal.

      SST
      09223-50010
      Standard Depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      Be careful not to damage the lip of the oil seal.

  4. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY