HEADLIGHT LEVELING ECU INSTALLATION

PROCEDURE

1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY

   
   

   1. Install the headlight leveling ECU assembly with the nut.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the connector.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

5. INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

   Click here

6. INSTALL LOWER STEERING COLUMN COVER

   Click here

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

8. PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here

9. CHECK SRS WARNING LIGHT

   Click here

10. PERFORM INITIALIZATION

    Click here