AUTOMATIC LIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

   
   

   1. Attach the claw to install the automatic light control sensor.

   2. Connect the connector.

2. INSTALL UPPER INSTRUMENT PANEL

   Click here

3. INSPECT AUTOMATIC LIGHT CONTROL SYSTEM

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

5. PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here

6. CHECK SRS WARNING LIGHT

   Click here