DOOR CONTROL RECEIVER INSTALLATION

PROCEDURE


  1. INSTALL DOOR CONTROL RECEIVER (w/o Smart Entry and Start System)


    1. B003P31C01
      B003R2S Nut
      B003LF2 Connector

      Connect the connector.

    2. Attach the guide to install the door control receiver with the nut.

  2. INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY (w/ Smart Entry and Start System)


    1. B003NU1C02
      B003R2S Nut
      B003LF2 Connector

      Connect the connector.

    2. Attach the guide to install the smart door control receiver assembly with the nut.

  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. CHECK SRS WARNING LIGHT

    Click here

  6. KEY REGISTRATION (w/o Smart Entry and Start System)

    Click here