DIFFERENTIAL SYSTEM(w/ Differential Lock), Diagnostic DTC:P17C0

DTC Code DTC Name
P17C0 Rear Differential Lock Solenoid Circuit Low

DESCRIPTION

This DTC is output when a malfunction is detected due to a short to ground occurring in the differential lock coil drive circuit of the rear differential.

DTC No. Detection Item DTC Detection Condition Trouble Area
P17C0 Rear Differential Lock Solenoid Circuit Low
  • Diagnosis Condition: Directly after ignition switch is turned to ON, or when rear differential is switched between free and locked (differential lock coil operating) with ignition switch turned to ON

  • Malfunction Status: Short to ground in differential lock coil drive circuit

  • Malfunction Time: 0.05 seconds or more

  • Other: 1 trip detection logic


  • Wire harness and connector

  • 4 wheel drive control ECU

  • Differential lock coil

WIRING DIAGRAM

B003NR0E04
*a Differential Lock Coil
*b 4 Wheel Drive Control ECU

PROCEDURE


  1. CHECK DIFFERENTIAL LOCK COIL


    1. Disconnect the C61 4 wheel drive control ECU connector.

    2. B003R4GC04
      *a

      Front view of wire harness connector

      (to 4 Wheel Drive Control ECU)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      C61-1 (SL+) or C61-5 (SL-) - Body ground Always 10 kΩ or higher
      Result
      Proceed to
      OK
      NG

    OK
    NG
  2. CHECK HARNESS AND CONNECTOR (4 WHEEL DRIVE CONTROL ECU - DIFFERENTIAL LOCK COIL)


    1. Disconnect the C61 4 wheel drive control ECU connector.

    2. Disconnect the e1 differential lock coil connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      C61-1 (SL+) or e1-2 (M1) - Body ground Always 10 kΩ or higher
      C61-5 (SL-) or e1-1 (M2) - Body ground Always 10 kΩ or higher
      Result
      Proceed to
      OK
      NG

    OK
    NG